Heavy Duty Control is designed for bi-directional control of 24 volt DC motors. This control is intended for high current applications. The output is rated for a 50 amp continuous load and up to a 200 amp intermittent load (10% duty cycle). This system is ideal for controlling lifts, jacks, winches, and agricultural applications where large capacity 24 Volt polarity reversing DC motors are used. The control is waterproof and suitable for use in harsh environments. The dimensions are approximately 3.5″ L x 3″ W x 2.5″ H. There are four screw terminals for the power connections. Two connect 24 volts and Ground and the other two connect to the DC motor. Additionally, there are three screw terminals for connecting low power leads from a control switch. SpecificationsInput voltage: 24VDC The output is rated for 50 amp continuous load and up to a 200 amp intermittent load (10% duty cycle).Operating temperature range: 0° F to 160°F.Dimensions are approximately 3.5″ L x 3″ W x 2.5″ H.A low power 3 position switch is required for activation.
30 Amp DPDT Double Pole Double Throw On-Off-On Rocker Switch – 129E-B/B
3 position DPDT On-Off-On Rocker Switch is rated at 30 amp @12VDC, 18 amp @ 120VAC, 10 amp @ 250VAC. This switch is maintained meaning it stays locked in the selected position when the button is released. The contacts are sealed by gaskets to keep out contaminants that cause premature switch failure. This heavy duty switch mounts in a .83 x 1.48 inch hole and it has 1/4 quick connect terminals. Black body and button.
Single Pole Double Throw On-Off-On Rocker Switch 16A@125VAC 10A@250VAC/12VDC
Popular sized Rocker Switch. Single Pole, Double Throw, On-Off-On. Black body and button.
