PGN Stainless Steel MIG Welding Wire – ER308L – 0.035 Inch, 2 x 10 Pound Spool – Low-Carbon Mild Steel MIG Wire for Reduced Splatter and Better Corrosion Resistance – For All Position Gas Welding  We set out to create a solid MIG wire that worked beautifully with stainless steel. MIG welding wire with an arc you could control, penetration that inspired confidence, and low splatter that kept cleaning to a minimum and aesthetics to the max.And we did just that. Meet the PGN ER308L welding wire. It creates smooth welds on 304, 304L, 308, 308L, 321, and 347 stainless steels. Thanks to the low carbon content (0.03% maximum), corrosion and intergranular carbide precipitation is greatly decreased.We go the extra mile by diligently packing our MIG welder wire in moisture-resistant film – something others don’t. This means wire that’s rust-free, has no tangles, and gives you no issues when feeding it into your welder.Whether you’re tackling a client’s project, performing repairs in the garage, or bringing striking metal art to life, the ER308L welding wire .035 allows you to create a variety of welds when working in all manner of positions.It’s ideal for both single & multi-pass welding and leads to aesthetic T-joints, butt welds, and lap welds. And with a wire thickness of 0.035″ (0.9mm), you’ll achieve great penetration without the high risk of burning through the base metal.With PGN, you also don’t just get 0.035 welding wire that will take your work to the next level; you get the support of an experienced team based right in South Florida. Go ahead, get MIG welding accessories you can count on. ModelER308LWire Diameter0.035″ inch (0.9mm)Weight20-lbsSpool Diameter8″ inchesCenter Hole (Hub) Diameter2″ inchWide (Spool)2″ inchesTensile Strenght: (RM MPa)510Deposited chemical composition(wt%) : C 0.53 / Si 0.53 / Mn 2.1 / S 0.01 / P 0.015 / Ni 9.95 / Cr 19.73 / Mo 0.02 / Cu 0.01MaterialStainless SteelPackage Inclusions2 x 10lb Stainless Steel MIG Wire Spool