Philmore TR121R 12VAC @1AMP Power Transformer Center Tap 6-0-6

Philmore TR121R – 12VAC @ 1AMP Power Transformer Center Tap 6-0-6 * Primary: 115VAC * Secondary Volts: 12 VAC * Secondary Amps: 1 * 60 Cycle operation * Lug termination * H: 1.67″, W: 1.96″, D: 1.37″ * Mounting Width:2.07″ 3/16″ mounting hole Normal 0 false false false MicrosoftInternetExplorer4

Transformer Center Tap 110/220VAC to 18V AC 9V-0-9V AC, 1000mA (1A), TMC USA

Center Tap AC TransformerInput AC Voltage: 120V / 240VOutput AC Voltage: 18V or 9V + 9V.Current: 1000mA 1A max Wire Leads: 100% copper, 6.5″ long Width: 50mm (74mm with tab)Depth: 37mmHeight: 42mmNet Weight: 10 oz Primary:For 110V AC input, use one Red and Black wire. Insulate and DO NOT connect the other Red wire, since it will be Hot when you power the other Red wire. (DO NOT connect both Red wires together, or you will create a short circuit and damage the transformer!)For 220V AC input: use two Red wires. DO NOT connect the black wire.Secondary:For 9V AC Output: use one blue and black wire (DO NOT connect the 2 blue wires together or you will create a short circuit and damage the transformer!)For 18V AC Output: use two blue wiresIf you need DC voltage then you need a power supply not a transformer.If you try to measure the output using the DC setting in your multimeter, it will not give you a voltage.You need to set it to VAC in order to measure the output voltage.

Philmore TR121 AC Transformer 12 Volts/CT 1A

The Philmore TR121 AC Transformer is a 12 volts, 1 ampere power transformer designed for chassis mounting. This step-down conversion transformer operates at a minimum of 60 Hz and has a turns ratio of 1:2. With a single phase and AC to AC conversion function, this unit is perfect for reducing the primary voltage to the specified secondary voltage rating of 12 volts. The California Prop 65 Warning indicates potential safety concerns, making it essential to take precautions when using this transformer in electrical equipment and supplies. Made by the trusted brand Philmore, this transformer is a reliable and efficient choice for various industrial and commercial applications.

5V 1A USB-C TP4056 DW01A 18650 Lithium Battery Charging Charger Module 1/2/5/10x

Enhanced Dual Function 5V 1A 1S LiPo Battery Charger TP4056 Module With Internal DW01A Battery Protection IC With USB-C Connector This is an enhanced USB-C powered lithium-ion polymer battery backup charger that can power a load from USB-C (load is connected to Out+ and Out-) and also charge a battery (B+ and B-). It will then switch to battery power when the USB connection is removed. It uses a TP4056 charging controller with a DW01A Lithium-Ion battery protection IC to protect the battery.It provides 1A charge current and then cuts off when the battery is charged. Furthermore, when the battery voltage drops below about 2.4V, the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection. However please check you have it connected correctly the first time. An LED indicates power/charge/battery status. This module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s and 18650s that don’t have their own protection circuit. It can charge two cells in parallel, however since the two cells share the charging current, they take twice as long to charge as a single cell.Specifications:Input: USB-C female or + and – solder terminalsInput voltage: 4.35-6V (recommended voltage 5V)Charge cut-off voltage: 4.2V + / – 1% (charges a 1S Lithium Ion Polymer Battery)Maximum charging current output: 1000mABattery overcharge protection voltage: 4.3VBattery discharge protection voltage: 2.4VBattery over-current protection current: 3ABoard size: 28mm * 17mm (1.1 * 0.67 inches), 29mm * 17mm (1.14 * 0.67 inches including the USB-C connector overhang)Indicator LEDs: Red/Green LED: Off – not connected or no power; Red – charging; Green – charge completeBlue LED: Off – no power; Blue – power onWorking temperature: -10C – +85COperation:Connect a USB-C cable for power, or 5V DC to pads marked IN+ and IN- on the left side of the moduleConnect battery cell to charge to B+/B- pads on the right side of the moduleA load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right sideImportant! Disconnect load when chargingThe red LED indicates charging in progress, green LED indicates charging is completePackage Includes:1X, 2X, 5X or 10X (1, 2, 5 or 10 pieces) 5V Enhanced 1A USB-C 18650 Lithium Battery Charging Module Package quantity selected at checkout Online documentation & usage guide

TP4056 5V 1A Micro USB 18650 Lithium Battery Charging And Protection Board

The TP4056 5V 1A Micro USB 18650 Lithium Battery Charging and Protection Board is a versatile unit that provides efficient and reliable power conversion. With a nominal voltage rating of 5V and a current rating of 1A, this board is designed for charging and protecting lithium batteries. The DC to DC current conversion ensures stable output for various electronic devices. The unit also features a Type C plug type for easy connectivity and a compact design, making it ideal for use in a wide range of applications

5pcs 5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module TP4056

Input Voltage: 4.5-5.5VInput Interface: Micro-USB / Solder padsOutput Current: 1A; Full Charge Output Voltage: 4.2VSize: 25x19x6mmIndicator: Red light – Charging, Green light – FullHigh performance lithium battery charging module using the TP4056 chip If the input voltage exceeds 5V, such as 5.2V or 5.5V, the charging current will be reduced to prevent overheating Suitable for 18650 lithium cells and other 3.6/3.76V lithium cells that are safe to charge at 1A or more Input Voltage: 4.5-5.5V Input Interface: Micro-USB / Solder pads Output Current: 1A; Full Charge Output Voltage: 4.2V Size: 25x19x6mm Indicator: Red light – Charging, Green light – Full Orders under $10 ship without tracking If you need tracking on orders under $10 then pay the extra $1.99 for package service Freight Forwarders and US Territories (except PR): Orders under $10 will be canceled unless the $1.99 shipping option is selected at checkout

Talk Logo

Ubicación

Calle Via Láctea Nº 454
Santiago de Surco – Lima

Contacto

+51 995 367 385
jechegaray@talk-peru.com

Elaborado por La Agencia Digital