Acrylic Heat Bending Machine 　 Attention 1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2.For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection. 3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if the machine will not be used in a long time.　 Description The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. 1.Processing Material: Acrylic, Plastic, PVC, Plexiglass. 2.Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. 3.The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. 4.You can also use many acrylic bender heaters to heat more bents at the same time. Parameter Voltage: 110V Frequency: 50/60Hz Power: 300W/800W/1500W/2000W Maximum Bending Width: 12in(300mm)24in.(600mm)48in(1220mm)71in(1800mm) Heating Thickness: within0.24in (6mm) Package Type: Cardboard Box Note:There is no battery in the thermometer, which needs to be prepared by the customer. Please note that the cooling water temperature should not exceed 40 ℃. Feature & Advantage 1.Reasonable design, small size, compact structure and beautiful appearance. 2.Heat even and temperature adjustable. 3.With circulating cooling water system on both sides of heating pipe. 4.Power supply joint and water pipe joint are at the same end. 5.The body is made of special aluminum extrusions. 6.Portable, small occupation, low consumption and reliable operation. 7.Light and practical with low cost, value-priced. 8.Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. 9.Free plugging and unplugging, easy to storage and assembles to worktable very conveniently. Recommended temperature for some regular materials: Acrylic: 210℃ Perspex: 195℃ PVC sheet: 155℃ ABS: 190℃ PET: 160℃ NOTE: Just for reference, and users may modify them according to their materials and working habits. Item Number:022138 Shipping & Handling ▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us. ▲ 6 months’ warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Collected by ebay. Return / Refund Returns & Exchanges ▲ All returns should be made within 30 days of delivery date. Items must be in unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15-30% restocking fee of the items purchase price will be charged. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.

Acrylic Heat Bending Machine 　 Attention 1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2.For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection. 3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if the machine will not be used in a long time.　 Description The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. 1.Processing Material: Acrylic, Plastic, PVC, Plexiglass. 2.Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. 3.The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. 4.You can also use many acrylic bender heaters to heat more bents at the same time. Parameter Voltage: 110V Frequency: 50/60Hz Power: 300W (Other model selection): 800W/1500W/2000W Maximum heating Width: 11.81in(300mm) (Other model selection): 23.62in(600mm)/48.03in(1220mm)/70.87in(1800mm) Heating Thickness: within0.24in (6mm) Angle plate length: 9.84in(25cm) Package Type: Cardboard Box Please note that the cooling water temperature should not exceed 40 ℃. Feature & Advantage 1.Reasonable design, small size, compact structure and beautiful appearance. 2.Heat even and temperature adjustable. 3.With circulating cooling water system on both sides of heating pipe. 4.Power supply joint and water pipe joint are at the same end. 5.The body is made of special aluminum extrusions. 6.Portable, small occupation, low consumption and reliable operation. 7.Light and practical with low cost, value-priced. 8.Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation. 9.Free plugging and unplugging, easy to storage and assembles to worktable very conveniently. Recommended temperature for some regular materials: Acrylic: 210℃ Perspex: 195℃ PVC sheet: 155℃ ABS: 190℃ PET: 160℃ NOTE: Just for reference, and users may modify them according to their materials and working habits. Operation and installation video https://youtu.be/ho_EnaGmOds Item Number:022436 Shipping & Handling ▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us. ▲ 6 months’ warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Collected by ebay. Return / Refund Returns & Exchanges ▲ All returns should be made within 30 days of delivery date. Items must be in unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition. ▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15-30% restocking fee of the items purchase price will be charged. Defective & Damaged Products ▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.