LED indicator for power on. No load power consumption <0.5W. 100% full load burn-in test. Universal AC input / Full range. Type: Auto Switching. Withstand 300 VAC surge input for 5 seconds. Maximum Output Power (W): 150.
SORENSEN / AMETEK SGA30X167C SGA SERIES HIGH POWER DC POWER SUPPLY, SGA30/167
Model: SGA30X167C. Combinations of these chassis can then be easily paralleled to achieve power levels up to 1.9 MW. Current: 167 A.
POWER-ONE INTERNATIONAL SERIES HC15-3-A
POWER-ONE INTERNATIONAL SERIES.
Adjustable 0-30/60/120V 0-2/3/5/10A Lab DC Power Supply Variable Bench Switching
All models are micro-switching DC power supplies. The output current range is continuously adjusted from 0 to the rated current. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs, etc.
2pcs DC-DC 5V-48V Adjustable Step-up Boost Power Converter Module XL6009 US
5V-32V Input to 6V-48V Output Adjustable Boost Step Up XL6009 Converter Power Supply Module 2 Pieces This versatile DC-DC variable output boost power supply / converter module accepts an input voltage from 5V to 32V and boosts it to any level from 6V to 48V (output voltage must be greater than input voltage). Based on the second-generation XLSEMI XL6009 chip, it offers higher efficiency and superior performance than older first-generation LM2577 solutions. Features:Wide input voltage: 5V – 32V Fully adjustable output voltage: 6V – 48V adjustable with onboard potentiometerEfficient MOSFET switching enables efficiency up to 94%High switching frequency of 400KHz for low ripple and fast response timeSpecifications: Non-isolated step-up (Boost)Input voltage: 5-32VInput Current: 4A (Max), No-load 18mAOutput voltage: 6-48V continuously adjustable (Output voltage must be greater than the input voltage)Output current: 2.5A (Max)Output power: Natural cooling 15W, plus heat sink 25W (Max)Conversion efficiency: Up to 94%, varies with input voltage, output voltage and currentOperating temperature: Industrial grade -40 C to + 85 C (If ambient temperature exceeds 40 C, power should be derated or additional heat sinking or forced air cooling used)Full load temperature rise: 45 COperating frequency: 400khzVoltage regulation: ± 0.5%Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation: ± 0.5%Voltage Regulation: ± 0.5%Short circuit protection: None (Please install fuse or protection circuit input)Input reverse polarity protection: None, please use a reverse protection diode in series with the inputInstallation: Two 3 mm mounting holesDimensions: 48mm x 23mm x 11mm LxWxH (1.9 x 0.9 x 0.4 inches)Weight: 13 gramsOperation: The 5V to 32V DC input voltage is connected to the solder pads labeled IN+ and IN-. The output voltage is connected to the load via the OUT+ and OUT- solder pads. Set output voltage using a voltmeter and onboard potentiometer before installing in your circuit. This is a Step-Up (Boost) converter, therefore the output voltage must be greater than the input voltage. For example, if the input voltage is 10V, the minimum output voltage will be about 11V. Package Includes: 2x (2 pieces) 5V-32V to 5V-48V Adjustable Boost XL6009 Step Up Converter Power Supply Module
Omni 20C+ 20000mah Laptop Power Bank Portable Charger | AC/DC/USB-C/Wireless
Brand new sealed item in perfect condition with all parts and manuals present….please see photos for details
Lot Of 4 Crydom D2440-10 Solid State RELAY 240V 40A
These relays were pulled from a working lighting system that had been updated
UNKNOWN BRAND VARIABLE DC POWER SUPPLY WITH EMICO METERS
Working variable DC power supply. Output is 0 to 7 volts . Both meters work. The fuse holder cap needs to be replaced. I couldn’t find any brand name or model designation on it. Thanks for looking.
